金属网结构参数对 CFRP 层合板雷击防护效果影响分析

taptap下载安装安卓学报 ›› 2025, Vol. 43 ›› Issue (2): 58-65.

金属网结构参数对 CFRP 层合板雷击防护效果影响分析

taptap下载安装安卓 a.交通科学与工程学院； b.航空工程学院，天津 300300

收稿日期:2022-12-29 修回日期:2023-03-02 出版日期:2025-05-14 发布日期:2025-05-14
作者简介:贾宝惠（1971— ），女，山西运城人，教授，硕士，研究方向为维修工程分析与持续适航技术.
基金资助:
国家自然科学基金项目（U2033209）

Analysis of the influence of metal mesh structure parameters on lightning

protection effect of CFRP laminates

a. College of Transportation Science and Engineering; b. College of Aeronautical Engineering, CAUC, Tianjin 300300, China

Received:2022-12-29 Revised:2023-03-02 Online:2025-05-14 Published:2025-05-14

摘要/Abstract

摘要：

为探究金属网几何结构参数对雷击防护能力的影响，本文建立了含有不同几何结构参数的金属网防护层碳

纤维增强复合材料（CFRP，carbon fiber reinforced polymer）层合板有限元模型，采用热电耦合分析模拟了无

防护、铝网防护和铜网防护下的 CFRP 雷击烧蚀损伤，对比分析了不同几何结构参数铜网防护下的CFRP 烧

蚀损伤。研究发现：在相同几何结构参数下，铜网相比铝网具有更好的雷击防护效果；金属网几何结构参数

能够影响其雷击防护效果，长短节距会影响金属网格节点数量，金属网的雷击防护能力会随着节点数量增

加而提高；增加网线宽度和厚度均能提高金属网的雷击防护能力，增加网线厚度提高的雷击防护能力优于

增加网线宽度；通过对比不同网格内角的铜网防护能力发现，能够相对较好地提高金属网雷击防护能力的

内角角度为 48°。

关键词:

CFRP 层合板, 雷击防护, 金属网几何结构参数, 有限元模型, 烧蚀损伤

Abstract:

To explore the influence of the geometric structure parameters of the metal mesh on its lightning protection ability, a

finite element model of carbon fiber reinforced composite (CFRP) laminates with different geometric structure parameters of the metal mesh protective layer was established. The thermal and electrical coupling analysis was used to

simulate the CFRP lightning ablation damage without protection, with aluminum mesh protection and with copper

mesh protection. CFRP ablation damage under copper mesh protection with different geometric structural parameters are compared and analysed. It is found that under the same geometric structure parameters, copper mesh has

better lightning protection effect than aluminum mesh. The geometric structure parameters of the metal mesh can

affect its lightning protection effect. The long and short intercept will affect the number of nodes of the metal mesh.

The lightning protection ability of the metal mesh will increase with the number of nodes. Increasing the width and

thickness of the wire can improve the lightning protection ability of the metal mesh, and the lightning protection ability improved by increasing the wire thickness is better than that by increasing the wire width. By comparing the

protective capability of copper mesh with different grid internal angles, it is found that 48° is the internal angle that

can relatively improve the lightning protection capability of metal mesh.

Key words:

CFRP laminate, lightning protection, geometrical structure parameter of metal mesh, finite element model, abla－

tive damage

中图分类号:

贾宝惠 a , 刘旭宇 b , 杨霄 b.

金属网结构参数对 CFRP 层合板雷击防护效果影响分析

[J]. taptap下载安装安卓学报, 2025, 43(2): 58-65.

JIA Baohui a , LIU Xuyub , YANG Xiaob.

Analysis of the influence of metal mesh structure parameters on lightning

protection effect of CFRP laminates

[J]. Journal of Civil Aviation University of China, 2025, 43(2): 58-65.

参考文献 20

	[1]
	ALAM P, MAMALIS D, ROBERT C, et al. The fatigue of carbon fibre
	reinforced plastics: a review[J]. Composites Part B: Engineering, 2019,
	166: 555-579.
[2]	中国民用航空局. 运输类飞机适航标准：CCAR-25-R3—2001[S]．
	北京: 中国民用航空局, 2016.
	[3]
	HIRANO Y, KATSUMATA S, IWAHORI Y, et al. Artificial lightning
	testing on graphite/epoxy composite laminate [J]. Composites Part A:
	Applied Science and Manufacturing, 2010, 41(10): 1461-1470.
[4]	姚学玲, 郭灿阳, 孙晋茹, 等. 碳纤维复合材料在雷电流作用下的损
	伤仿真与试验[J]. 高电压技术, 2017, 43(5): 1400-1408.
[5]	孙晋茹, 姚学玲, 李亚丰, 等. 碳纤维增强树脂复合材料在多重连续
	雷电流冲击下的损伤特性[J]. 复合材料学报, 2019, 36(12): 2764-
	2771.
	[6]
	SUN J R, LI Y F, TIAN X Y, et al. Experimental and numerical analysis
	of damage mechanisms for carbon fiber-reinforced polymer composites
	subjected to lightning strikes[J]. Engineering Failure Analysis, 2020,
	118: 104894.
	[7]
	MA X, SCARPA F, PENG H X, et al. Design of a hybrid carbon fibre/
	carbon nanotube composite for enhanced lightning strike resistance[J].
	Aerospace Science and Technology, 2015, 47: 367-377.
[8]	李斌, 常飞, 肖尧, 等. 碳纤维增强银粉改性树脂复合材料的
	雷击损伤效应[J]. 复合材料学报, 2020, 37(8): 1911-1920.
	[9]
	WANG F S, JI Y Y, YU X S, et al. Ablation damage assessment of air－
	craft carbon fiber/epoxy composite and its protection structures suffered
	from lightning strike[J]. Composite Structures, 2016, 145: 226-241.
[10]	付尚琛, 石立华, 周颖慧, 等. 喷铝涂层碳纤维增强树脂基复合材料
	抗雷击性能实验及仿真[J]. 复合材料学报, 2018, 35(10): 2730-2744.
[11]	卢翔, 赵淼, 单泽众. 不同喷铝参数对复合材料雷击防护性能
	模拟[J]. 航空材料学报, 2020, 40(2): 79-88.
[12]	GUO Y L, XU Y Z, WANG Q L, et al. Enhanced lightning strike protec－
	tion of carbon fiber composites using expanded foils with anisotropic
	electrical conductivity [J]. Composites Part A: Applied Science and
	Manufacturing, 2019, 117: 211-218.
[13]	WANG F S, ZHANG Y, MA X T, et al. Lightning ablation suppression
	of aircraft carbon/epoxy composite laminates by metal mesh[J]. Journal
	of Materials Science & Technology, 2019, 35(11): 2693-2704.
[14]	罗立, 张骁亚, 杨文锋. 金属网对航空复合材料雷击损伤的防护[J].
	航空材料学报, 2020, 40(5): 70-79.
[15]	田明辉, 刘旭宇, 武涛, 等. 铜网防护层构型对复合材料层合板雷
	击烧蚀损伤的影响分析[J]. 科学技术与工程, 2022, 22(21): 9071-
	9080.
[16]	SAE. Aircraft lightning environment and related test waveforms: SAEARP-5412B-2013[S]. US: SAE, 2013.
[17]	ASTM. Standard test method for compressive residual strength proper－
	ties of damaged polymer matrix composite plates: ASTM D7137/D7137M-
	07[S]. US: ASTM, 2007.
[18]	FOSTER P, ABDELAL G, MURPHY A. Understanding how arc attach－
	ment behaviour influences the prediction of composite specimen ther－
	mal loading during an artificial lightning strike test[J]. Composite Struc－
	tures, 2018, 192: 671-683.
[19]	LEE J, LACY T E JR, PITTMAN C U JR, et al. Temperature-dependent
	thermal decomposition of carbon/epoxy laminates subjected to simulated
	lightning currents[J]. Polymer Composites, 2018, 39 (S4): E2185 -
	E2198.
[20]	MILLEN S L J, MURPHY A, CATALANOTTI G, et al. Coupled ther－
	mal-mechanical progressive damage model with strain and heating rate
	effects for lightning strike damage assessment[J]. Applied Composite
	Materials, 2019, 26(5): 1437-1459.