taptap下载安装安卓学报

• 民用航空 • 上一篇    下一篇

ACARS地面站功能测试环境的构建与实现

胡铁乔,宋德民,李阳波   

  1. (taptap下载安装安卓智能信号与图像处理重点实验室,天津300300)
  • 收稿日期:2017-02-27 修回日期:2017-04-10 出版日期:2017-12-27 发布日期:2017-12-15
  • 作者简介:胡铁乔(1970—),男,河南洛阳人,副教授,工学硕士,研究方向为自适应信号处理、阵列信号处理、硬件系统的设计与实现.
  • 基金资助:
    国家自然科学基金项目(61471363);taptap下载安装安卓实验技术创新基金(2016SYCX12);taptap下载安装安卓波音基金(20160159204)

Construction and implementation of ACARS ground station test environment

HU Tieqiao, SONG Demin, LI Yangbo   

  1. (Intelligent Signal and Image Processing Key Lab of Tianjin, CAUC, Tianjin 300300, China)
  • Received:2017-02-27 Revised:2017-04-10 Online:2017-12-27 Published:2017-12-15

摘要: 通过ACARS 地面站功能测试环境构建与实现的基本方法,依据ARINC 618规范,对ACARS 链路层协议进行分析,并且软硬件结合实现ACARS 地面站的基本功能。首先,在Visio Studio 2013 平台上使用MFC 分别做出模拟机载CMU 和模拟地面站DSP,两模拟设备通过TCP/IP 通信软件实现ACARS地面站基本功能。然后,模拟机载CMU 和模拟地面站DSP通过串口分别与VHF 收发器软件无线电平台相连,构建成一个ACARS 报文收、发的真实通信环境。实验证明该模拟地面站能实现ACARS 地面站的基本功能,为实现国产ACARS 设备奠定基础。

关键词: 链路层, 机载设备, 地面站, 通信

Abstract: The basic building and implementing methods of ACARS ground station test environment is introduced. ACARS link layer protocol is analyzed according to ARINC 618 specification, implementing ACARS ground station basic function. First of all, MFC is used to make simulated airborne CMU and simulated ground station DSP on Visio Studio 2013 platform through TCP/IP communication. Simulated airborne CMU and ground station DSP are respectively connected with VHF transceiver software radio platform through serial port to construct a real ACARS communication environment sending and receiving messages. Experiment proves that the simulated ground equipment can realize basic function of real ACARS ground station, and also lay foundation for ACARS radio station localization.

Key words: link layer, airborne equipment, ground station, communication

中图分类号: 

Baidu
map