宽体客机机身框段适坠性仿真分析与评估

taptap下载安装安卓学报

宽体客机机身框段适坠性仿真分析与评估

张晓敏^a，马骢瑶^b，霍雨佳^b，牟浩蕾^b

（taptap下载安装安卓a.工程技术训练中心；b. 天津市民用航空器适航与维修重点实验室，天津300300）

收稿日期:2017-03-03 修回日期:2017-04-10 出版日期:2017-08-25 发布日期:2017-11-08
作者简介:张晓敏（1985—），男，河北沧州人，助教，硕士，研究方向为航空事故分析、飞机结构修理.
基金资助:
中央高校基本科研业务费专项（3122017020）；中国民用航空局科技基金项目（MHRD20140207）

Crashworthiness simulation analysis and evaluation of wide-body aircraft fuselage section

ZHANG Xiaomin^a, MA Congyao^b, HUO Yujia^b, MOU Haolei^b

(a. Engineering Techniques Training Center; b. Civil Aircraft Airworthiness and Maintenance Key Lab of Tianjin,
CAUC, Tianjin 300300, China)

Received:2017-03-03 Revised:2017-04-10 Online:2017-08-25 Published:2017-11-08

摘要/Abstract

摘要：

针对宽体客机机身结构适坠性设计、验证及适航审定需求，分析机身框段不同破坏模式下的吸能特性。建立双层宽体客机机身框段有限元模型，分析其在9.14 m/s坠撞速度下的动态响应特性。针对两种不同的宽体客机机身框段下部结构变形破坏模式，研究得到两种情况下座椅与地板连接处加速度响应和机身各部件吸能情况。仿真结果表明，不同破坏模式下宽体客机客舱空间都得到较好维持，座椅与地板连接处的加速度在人体耐受极限范围内，相同机身部件吸能量不同，其适坠性能可通过改善货舱下部吸能能力得到进一步提升，可为宽体客机结构适坠性设计、分析及评估提供参考。

关键词: 宽体客机, 适坠性, 有限元法, 失效模式, 加速度响应, 吸能特性

Abstract:

For the requirements of crashworthiness design, verification and certification of wide-body aircraft, different failure modes of fuselage sections are analyzed. Finite element model of double decks wide-body aircraft fuselage section is developed and the dynamic responses of wide-body fuselage section subjected to vertical impact velocity of 9.14 m/s are analyzed. The failure modes, acceleration responses and energy -absorbing characteristics are obtained and analyzed. Simulation results show that the cabins of wide-body aircrafts are well maintained for the two different cases, and the acceleration responses of junctions between seats and floor are within the limits of human tolerance. The energy absorbed by the same fuselage structures are different for two cases, the energy-absorbing capability of cargo floor structures can be improved by optimizing design, and thus the wide-body aircraft crashworthiness performance can be enhanced, which has a certain reference value for crashworthiness design, analysis and evaluation of wide-body aircraft fuselage section.

Key words: wide-body aircraft, crashworthiness, finite element method, failure mode, acceleration response, energyabsorbing characteristics

中图分类号:

V223

张晓敏，马骢瑶，霍雨佳，牟浩蕾. 宽体客机机身框段适坠性仿真分析与评估[J]. taptap下载安装安卓学报.

ZHANG Xiaomin, MA Congyao, HUO Yujia, MOU Haolei. Crashworthiness simulation analysis and evaluation of wide-body aircraft fuselage section[J]. .

参考文献

[1] 张弘，魏荣祥. 通用飞机抗坠撞设计指南[M]. 北京: 航空工业出版社, 2009.

[2] FAA. 25-321-SC SpecialConditions:AirbusModel A380-800Airplane,Crashworthiness[S]. 2006.

[3] FAA. 25-362-SC Special Conditions: Boeing Model 787-8 Airplane；Crashworthiness[S]. 2007.

[4] FAA. 25 -537 -SC Special Conditions: Airbus A350 -900 AirplaneCrashworthiness, Emergency Landing Conditions[S]. 2014.

[5] Boeing performs crash test on 787 fuselage section[EB/OL].（2007-08-22）[2017-04-20].http://komonews.com/archive/boeing-performs-crashtest-on-787-fuselage-section.

[6] Boeing performs key 787 dreamliner crash test[EB/OL].（2007-08-24）[2017-04-20]. http://www.manufacturing.net/news/2007/08/boeing-performs-key-787-dreamliner-crash-test.

[7] FERABOLI P, WADE B, DELEO F, et al. LS-DYNA MAT54 modeling of the axial crushing of a composite tape sinusoidal specimen[J]. Composites: Part A, 2011, 42(11): 1809-1825.

[8] FERABOLI P. Development of a corrugated test specimen for composite materials energy absorption[J]. Journal of Composite Material, 2008, 42(3): 229-256.

[9] FERABOLI P. Development of a modified flat plate test and fixture specimen for composite materials crush energy absorption[J]. Journal of Composite Material, 2009, 43(19): 1967-1990.

[10] FERABOLI P, DELEO F, WADE B, et al. Predictive modeling of an energy-absorbing sandwich structural concept using the building block approach[J]. Composites: Part A, 2010, 41(6): 774-786.

[11] 刘小川,周苏枫,马君峰,等. 民机客舱下部吸能结构分析与试验相关性研究[J].航空学报, 2012, 33(12): 2202-2210.

[12] 郑建强,向锦武,罗漳平,等.民机机身下部结构耐撞性优化设计[J].航空学报, 2012, 33(4): 640-649.

[13] FASANELLA E L, ALFARO-BOU E. Vertical Drop Test of a Transport Fuselage Section Located Aft of theWing, NASA-TM89025[R]. 1986.

[14] FASANELLA E L, JACKSON K E. Crash Simulation of a Vertical Drop Test of aB737FuselageSectionWithAuxiliary Fuel Tank[R]. US Army Research Laboratory, Vehicle Technology Center, Langley Research Center, 2000.

[15] ABRAMOWITZ A, SMITH T G, VU T. Vertical Drop Test of a Narrowbody Transport Fuselage Section with a Conformable Auxiliary Fuel Tank Onboard[R]. FAA, 2000.

[16] ABRAMOWITZ A, SMITHT G, VU T, et al. Vertical Drop Test of a Narrow-body Transport Fuselage Sction with Overhead Stowage bins[R].FAA, 2002.

[17] LEPAGE F, CARCIENTE R. A320 Fuselage Section Vertical Drop Test,Part2: Test Results[R]. CEAT test report S95 5776/2, European Community funded research project‘Crashworthiness for commercial aircraft’,1995.

[18] CCAR-25-R4,中国民用航空规章: 第25部-运输类飞机适航标准[S].北京:中国民用航空局, 2011.